|
STEP
4:
Hold aluminum mounts flat against interior walls with either
screw down. Place ends of LOC-R-BAR™ into aluminum mount.
This procedure requires two people.
IMPORTANT:
Be sure that LOC-R-BAR™ and aluminum mounts are STRAIGHT,
LEVEL, and FIRMLY held against interior walls of boat.
|
STEP
5:
Mark the sidewall of the boat below the single screw on the
aluminum mount. This provides vertical location for hole placement. |
STEP
6:
Drill hole into sidewall with drill flat on deck of boat.
This will allow hole to be slightly above the deck. Always
be sure to check for any wiring as you drill holes.Always
install brackets as low to the deck as possible.
|
